Shingleton Guard product documents
Shingleton Guard Safety Data Sheet
Approved Revision C
NxTech Holdings LLC d/b/a Vital Coat is the document owner, seller, and warrantor. Shingleton Guard is the Roof Scientist white-label product/program.
Download Safety Data Sheet PDF
SHINGLETON GUARD™
SAFETY DATA SHEET
1. IDENTIFICATION
2. HAZARDS IDENTIFICATION
Precautionary information
- Avoid contact with eyes and prolonged or repeated skin contact.
- Avoid breathing spray mist. Use adequate ventilation and appropriate spray controls.
- Wash hands thoroughly after handling. Do not ingest.
- Keep out of reach of children. Clean spills promptly to prevent slipping.
3. COMPOSITION / INFORMATION ON INGREDIENTS
The finished mixture is not classified as hazardous based on available supplier information and its finished-product formulation.
4. FIRST-AID MEASURES
5. FIRE-FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
- Avoid eye and skin contact and breathing spray mist.
- Wear appropriate personal protective equipment.
- Restrict access and use caution because wet material is slippery.
Containment and cleanup
- Stop the release if it can be done safely. Prevent entry into drains, storm drains, soil, and waterways.
- Contain with sand, vermiculite, or another inert absorbent. Collect material in a suitable closed container.
- Wash the affected area with soap and water after bulk material has been collected. Dispose of waste in accordance with applicable requirements.
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
11. TOXICOLOGICAL INFORMATION
Toxicological studies have not been performed on the finished mixture. The information below is based on available supplier information and the finished-product classification.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Dispose of contents and containers in accordance with applicable federal, state, and local requirements. Do not discharge liquid product into drains, stormwater systems, waterways, or onto the ground. Empty containers should be handled in accordance with local requirements. Waste classification is the responsibility of the generator and may depend on use, contamination, and local rules.
14. TRANSPORT INFORMATION
15. REGULATORY INFORMATION
The declarations below are based on available supplier information for the finished mixture and should be revalidated whenever the formulation or applicable requirements change.
16. OTHER INFORMATION
Disclaimer
This Safety Data Sheet is based on information believed reliable and is provided as safety guidance, not as a product specification or warranty. Users are responsible for determining suitability, following the current product label and Technical Data Sheet, and complying with applicable laws and workplace-safety requirements.
END OF SAFETY DATA SHEET
| Document control | Details |
| Document number | SDS-SG-001 |
| Revision | Revision C — approved August 10, 2026 |
| Revision date | July 22, 2026 |
| Product classification | Not classified as hazardous under OSHA 29 CFR 1910.1200 |
| Field | Information |
| Product identifier | Shingleton Guard™ |
| Product code | NXT-S19M |
| Chemical family | Proprietary water-based acrylic copolymer mixture |
| Recommended use | Professional asphalt-shingle roof preservation coating / sealer |
| Restrictions on use | For professional exterior use. Not intended for interior applications, as a waterproofing membrane, as a leak-repair product, or for structurally unsound roofs. Use only as directed by the current product label and Technical Data Sheet. |
| Supplier | NxTech Holdings LLC d/b/a Vital Coat |
| Address | 668 Capital Circle NE, Suite 12, Tallahassee, Florida 32301 USA |
| Telephone / email | 1-844-284-2858 | [email protected] |
| Emergency telephone | 1-844-284-2858 — available during normal business hours |
| Item | Classification / Statement |
| OSHA classification | Based on available supplier information and the finished-product formulation, this mixture is not classified as hazardous under the OSHA Hazard Communication Standard, 29 CFR 1910.1200. |
| Signal word | None required |
| Hazard pictograms | None required |
| Hazard statements | None required for OSHA-classified hazards |
| Other hazards | Wet product and spills may create slippery surfaces. Spray mist may cause temporary eye or respiratory discomfort. Repeated or prolonged contact may cause mild skin irritation in sensitive individuals. |
| Component information | Disclosure |
| Chemical nature | Proprietary water-based acrylic copolymer mixture |
| Hazardous ingredients | No ingredients are required to be disclosed at applicable OSHA hazard-classification or concentration thresholds. |
| Trade-secret statement | Specific chemical identities and concentrations are withheld as trade secrets where permitted by applicable law. |
| Route | First-aid response |
| Eye contact | Rinse cautiously with clean water for at least 15 minutes, lifting the upper and lower eyelids. Remove contact lenses if present and easy to do. Obtain medical advice if irritation persists. |
| Skin contact | Wash with soap and water. Remove contaminated clothing and wash it before reuse. Obtain medical advice if irritation persists. |
| Inhalation | Move to fresh air if spray mist causes discomfort. Obtain medical attention if breathing difficulty or irritation persists. |
| Ingestion | Rinse mouth. Do not induce vomiting unless directed by medical personnel. Contact a physician or poison-control center if symptoms occur or a significant amount is swallowed. |
| Most important symptoms | Temporary eye, skin, respiratory, or gastrointestinal irritation may occur. |
| Medical treatment | Treat symptomatically. No specific antidote is known. |
| Item | Information |
| Suitable extinguishing media | Use extinguishing media appropriate for the surrounding fire, including water spray, foam, dry chemical, or carbon dioxide. |
| Unsuitable media | Do not use a solid water stream where it may spread burning material. |
| Specific hazards | The product is water-based and is not expected to sustain combustion under normal conditions. Thermal decomposition may produce carbon oxides and other irritating gases. |
| Protective equipment | Firefighters should use protective equipment appropriate to the surrounding fire, including self-contained breathing apparatus when conditions require it. |
| Topic | Requirement |
| Safe handling | Avoid eye and skin contact. Avoid breathing spray mist. Do not ingest. Wash after handling. Keep the container closed when not in use. |
| Storage | Store in a cool, dry, well-ventilated area between 40°F and 95°F (4°C and 35°C). Protect from freezing and excessive heat. Keep containers tightly closed. |
| Incompatibilities | Keep away from strong acids, strong bases, and strong oxidizing agents. |
| Shelf life | Refer to the current product label and Technical Data Sheet for controlled shelf-life information. |
| Control | Guidance |
| Occupational exposure limits | No occupational exposure limits have been established for the finished mixture. |
| Engineering controls | Provide adequate general ventilation. Control spray mist at the source where practical. Avoid application in confined or poorly ventilated spaces without an appropriate respiratory-hazard assessment. |
| Eye / face protection | Wear safety glasses with side shields. Use chemical splash goggles or a face shield when splashing is possible. |
| Skin protection | Wear protective gloves and work clothing appropriate to the task and anticipated exposure. |
| Respiratory protection | Normally not required with adequate ventilation and controlled spraying. If ventilation is inadequate or spray mist cannot be controlled, select respiratory protection through the employer’s respiratory-protection program and applicable OSHA requirements. |
| Hygiene | Wash hands after handling. Do not eat, drink, or smoke while using the product. Remove contaminated clothing and wash before reuse. |
| Property | Value |
| Physical state | Liquid |
| Color / appearance | Milky white; dries clear |
| Odor | Slight/Typical Acrylic |
| Odor threshold | Not determined |
| Melting point / freezing point | Not determined; protect from freezing |
| Boiling point or initial boiling point and range | 212°F/ 100°C |
| Flammability | Not classified as flammable |
| Lower and upper explosion limits | Not applicable / not determined |
| Flash point | None |
| Auto-ignition temperature | Not determined |
| Decomposition temperature | Not determined |
| pH | Neutral to Slightly Acidic |
| Viscosity | <500 cps |
| Solubility | Water-based; Infinite |
| Partition coefficient n-octanol/water | Not determined |
| Vapor pressure | Not determined |
| Density and/or relative density | 1.02 |
| Relative vapor density | Not determined |
| Particle characteristics | Not applicable — liquid mixture |
| Item | Information |
| Reactivity | Not reactive under normal conditions. Hazardous polymerization is not expected. |
| Chemical stability | Stable under recommended storage and handling conditions. |
| Possibility of hazardous reactions | None expected under normal processing. |
| Conditions to avoid | Freezing, excessive heat, and contamination with incompatible materials. |
| Incompatible materials | Strong acids, strong bases, and strong oxidizing agents. |
| Hazardous decomposition products | Thermal decomposition may produce carbon oxides and other irritating gases. |
| Endpoint | Information |
| Likely routes of exposure | Eye contact, skin contact, inhalation of spray mist, and ingestion |
| Acute effects | May cause temporary irritation or discomfort. The mixture is not classified for acute toxicity. |
| Skin corrosion / irritation | Not classified. Prolonged or repeated contact may cause mild irritation in sensitive individuals. |
| Serious eye damage / irritation | Not classified. Direct contact may cause temporary irritation. |
| Respiratory or skin sensitization | Not classified based on available information. |
| Germ-cell mutagenicity | Not classified based on available information. |
| Carcinogenicity | Not classified based on available information. |
| Reproductive toxicity | Not classified based on available information. |
| STOT — single or repeated exposure | Not classified based on available information. |
| Aspiration hazard | Not classified. |
| Numerical measures of toxicity | No finished-mixture acute toxicity estimate is available. |
| Topic | Information |
| Ecotoxicity | No finished-mixture data are available. |
| Persistence and degradability | No finished-mixture data are available. |
| Bioaccumulative potential | No finished-mixture data are available. |
| Mobility in soil | No finished-mixture data are available. |
| Other adverse effects | Avoid uncontrolled release to soil, drains, stormwater systems, and waterways. |
| Transport field | Status |
| UN number | Not regulated |
| UN proper shipping name | Not regulated |
| Transport hazard class | Not regulated |
| Packing group | Not regulated |
| Environmental hazards | Not regulated as a transport environmental hazard based on available information |
| Special precautions | Protect containers from damage, freezing, and excessive heat. Keep containers upright and securely closed. |
| Bulk transport | Not applicable to packaged product as supplied |
| Regulation | Status |
| OSHA Hazard Communication Standard | The finished mixture is not classified as hazardous under 29 CFR 1910.1200. |
| TSCA | Components are listed on, or exempt from, the U.S. Toxic Substances Control Act inventory based on supplier information. |
| EPCRA / SARA 302 and 313 | No reportable components identified at applicable thresholds based on available supplier information. |
| EPCRA / SARA 311–312 | Refer to the Section 2 finished-mixture classification and applicable facility reporting thresholds. |
| CERCLA | No reportable hazardous substances identified at applicable thresholds based on available supplier information. |
| California Proposition 65 | No listed chemicals are intentionally added at concentrations requiring a warning based on available supplier information. Reassess if the formulation or supplier information changes. |
| Canadian distribution | No Canadian WHMIS or Hazardous Products Regulations classification is asserted by this U.S. SDS. Complete a separate Canadian review before Canadian distribution. |
| Field | Information |
| Prepared by | NxTech Holdings LLC d/b/a Vital Coat |
| Address | 668 Capital Circle NE, Suite 12, Tallahassee, Florida 32301 USA |
| Telephone / email | 1-844-284-2858 | [email protected] |
| Original issue date | July 20, 2025 |
| Revision date | July 22, 2026 |
| Revision | Revision C |
| Revision summary | Storage range standardized at 40–95°F (4–35°C); Section 9 melting/freezing, auto-ignition, and decomposition entries aligned to the approved treatment as not determined. |
Return to Shingleton Guard Product Documents
Shingleton Guard product documents
Shingleton Guard Safety Data Sheet
Approved Revision C
NxTech Holdings LLC d/b/a Vital Coat is the document owner, seller, and warrantor. Shingleton Guard is the Roof Scientist white-label product/program.
Download Safety Data Sheet PDF
SHINGLETON GUARD™
SAFETY DATA SHEET
1. IDENTIFICATION
2. HAZARDS IDENTIFICATION
Precautionary information
- Avoid contact with eyes and prolonged or repeated skin contact.
- Avoid breathing spray mist. Use adequate ventilation and appropriate spray controls.
- Wash hands thoroughly after handling. Do not ingest.
- Keep out of reach of children. Clean spills promptly to prevent slipping.
3. COMPOSITION / INFORMATION ON INGREDIENTS
The finished mixture is not classified as hazardous based on available supplier information and its finished-product formulation.
4. FIRST-AID MEASURES
5. FIRE-FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
- Avoid eye and skin contact and breathing spray mist.
- Wear appropriate personal protective equipment.
- Restrict access and use caution because wet material is slippery.
Containment and cleanup
- Stop the release if it can be done safely. Prevent entry into drains, storm drains, soil, and waterways.
- Contain with sand, vermiculite, or another inert absorbent. Collect material in a suitable closed container.
- Wash the affected area with soap and water after bulk material has been collected. Dispose of waste in accordance with applicable requirements.
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
11. TOXICOLOGICAL INFORMATION
Toxicological studies have not been performed on the finished mixture. The information below is based on available supplier information and the finished-product classification.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Dispose of contents and containers in accordance with applicable federal, state, and local requirements. Do not discharge liquid product into drains, stormwater systems, waterways, or onto the ground. Empty containers should be handled in accordance with local requirements. Waste classification is the responsibility of the generator and may depend on use, contamination, and local rules.
14. TRANSPORT INFORMATION
15. REGULATORY INFORMATION
The declarations below are based on available supplier information for the finished mixture and should be revalidated whenever the formulation or applicable requirements change.
16. OTHER INFORMATION
Disclaimer
This Safety Data Sheet is based on information believed reliable and is provided as safety guidance, not as a product specification or warranty. Users are responsible for determining suitability, following the current product label and Technical Data Sheet, and complying with applicable laws and workplace-safety requirements.
END OF SAFETY DATA SHEET
| Document control | Details |
| Document number | SDS-SG-001 |
| Revision | Revision C — approved August 10, 2026 |
| Revision date | July 22, 2026 |
| Product classification | Not classified as hazardous under OSHA 29 CFR 1910.1200 |
| Field | Information |
| Product identifier | Shingleton Guard™ |
| Product code | NXT-S19M |
| Chemical family | Proprietary water-based acrylic copolymer mixture |
| Recommended use | Professional asphalt-shingle roof preservation coating / sealer |
| Restrictions on use | For professional exterior use. Not intended for interior applications, as a waterproofing membrane, as a leak-repair product, or for structurally unsound roofs. Use only as directed by the current product label and Technical Data Sheet. |
| Supplier | NxTech Holdings LLC d/b/a Vital Coat |
| Address | 668 Capital Circle NE, Suite 12, Tallahassee, Florida 32301 USA |
| Telephone / email | 1-844-284-2858 | [email protected] |
| Emergency telephone | 1-844-284-2858 — available during normal business hours |
| Item | Classification / Statement |
| OSHA classification | Based on available supplier information and the finished-product formulation, this mixture is not classified as hazardous under the OSHA Hazard Communication Standard, 29 CFR 1910.1200. |
| Signal word | None required |
| Hazard pictograms | None required |
| Hazard statements | None required for OSHA-classified hazards |
| Other hazards | Wet product and spills may create slippery surfaces. Spray mist may cause temporary eye or respiratory discomfort. Repeated or prolonged contact may cause mild skin irritation in sensitive individuals. |
| Component information | Disclosure |
| Chemical nature | Proprietary water-based acrylic copolymer mixture |
| Hazardous ingredients | No ingredients are required to be disclosed at applicable OSHA hazard-classification or concentration thresholds. |
| Trade-secret statement | Specific chemical identities and concentrations are withheld as trade secrets where permitted by applicable law. |
| Route | First-aid response |
| Eye contact | Rinse cautiously with clean water for at least 15 minutes, lifting the upper and lower eyelids. Remove contact lenses if present and easy to do. Obtain medical advice if irritation persists. |
| Skin contact | Wash with soap and water. Remove contaminated clothing and wash it before reuse. Obtain medical advice if irritation persists. |
| Inhalation | Move to fresh air if spray mist causes discomfort. Obtain medical attention if breathing difficulty or irritation persists. |
| Ingestion | Rinse mouth. Do not induce vomiting unless directed by medical personnel. Contact a physician or poison-control center if symptoms occur or a significant amount is swallowed. |
| Most important symptoms | Temporary eye, skin, respiratory, or gastrointestinal irritation may occur. |
| Medical treatment | Treat symptomatically. No specific antidote is known. |
| Item | Information |
| Suitable extinguishing media | Use extinguishing media appropriate for the surrounding fire, including water spray, foam, dry chemical, or carbon dioxide. |
| Unsuitable media | Do not use a solid water stream where it may spread burning material. |
| Specific hazards | The product is water-based and is not expected to sustain combustion under normal conditions. Thermal decomposition may produce carbon oxides and other irritating gases. |
| Protective equipment | Firefighters should use protective equipment appropriate to the surrounding fire, including self-contained breathing apparatus when conditions require it. |
| Topic | Requirement |
| Safe handling | Avoid eye and skin contact. Avoid breathing spray mist. Do not ingest. Wash after handling. Keep the container closed when not in use. |
| Storage | Store in a cool, dry, well-ventilated area between 40°F and 95°F (4°C and 35°C). Protect from freezing and excessive heat. Keep containers tightly closed. |
| Incompatibilities | Keep away from strong acids, strong bases, and strong oxidizing agents. |
| Shelf life | Refer to the current product label and Technical Data Sheet for controlled shelf-life information. |
| Control | Guidance |
| Occupational exposure limits | No occupational exposure limits have been established for the finished mixture. |
| Engineering controls | Provide adequate general ventilation. Control spray mist at the source where practical. Avoid application in confined or poorly ventilated spaces without an appropriate respiratory-hazard assessment. |
| Eye / face protection | Wear safety glasses with side shields. Use chemical splash goggles or a face shield when splashing is possible. |
| Skin protection | Wear protective gloves and work clothing appropriate to the task and anticipated exposure. |
| Respiratory protection | Normally not required with adequate ventilation and controlled spraying. If ventilation is inadequate or spray mist cannot be controlled, select respiratory protection through the employer’s respiratory-protection program and applicable OSHA requirements. |
| Hygiene | Wash hands after handling. Do not eat, drink, or smoke while using the product. Remove contaminated clothing and wash before reuse. |
| Property | Value |
| Physical state | Liquid |
| Color / appearance | Milky white; dries clear |
| Odor | Slight/Typical Acrylic |
| Odor threshold | Not determined |
| Melting point / freezing point | Not determined; protect from freezing |
| Boiling point or initial boiling point and range | 212°F/ 100°C |
| Flammability | Not classified as flammable |
| Lower and upper explosion limits | Not applicable / not determined |
| Flash point | None |
| Auto-ignition temperature | Not determined |
| Decomposition temperature | Not determined |
| pH | Neutral to Slightly Acidic |
| Viscosity | <500 cps |
| Solubility | Water-based; Infinite |
| Partition coefficient n-octanol/water | Not determined |
| Vapor pressure | Not determined |
| Density and/or relative density | 1.02 |
| Relative vapor density | Not determined |
| Particle characteristics | Not applicable — liquid mixture |
| Item | Information |
| Reactivity | Not reactive under normal conditions. Hazardous polymerization is not expected. |
| Chemical stability | Stable under recommended storage and handling conditions. |
| Possibility of hazardous reactions | None expected under normal processing. |
| Conditions to avoid | Freezing, excessive heat, and contamination with incompatible materials. |
| Incompatible materials | Strong acids, strong bases, and strong oxidizing agents. |
| Hazardous decomposition products | Thermal decomposition may produce carbon oxides and other irritating gases. |
| Endpoint | Information |
| Likely routes of exposure | Eye contact, skin contact, inhalation of spray mist, and ingestion |
| Acute effects | May cause temporary irritation or discomfort. The mixture is not classified for acute toxicity. |
| Skin corrosion / irritation | Not classified. Prolonged or repeated contact may cause mild irritation in sensitive individuals. |
| Serious eye damage / irritation | Not classified. Direct contact may cause temporary irritation. |
| Respiratory or skin sensitization | Not classified based on available information. |
| Germ-cell mutagenicity | Not classified based on available information. |
| Carcinogenicity | Not classified based on available information. |
| Reproductive toxicity | Not classified based on available information. |
| STOT — single or repeated exposure | Not classified based on available information. |
| Aspiration hazard | Not classified. |
| Numerical measures of toxicity | No finished-mixture acute toxicity estimate is available. |
| Topic | Information |
| Ecotoxicity | No finished-mixture data are available. |
| Persistence and degradability | No finished-mixture data are available. |
| Bioaccumulative potential | No finished-mixture data are available. |
| Mobility in soil | No finished-mixture data are available. |
| Other adverse effects | Avoid uncontrolled release to soil, drains, stormwater systems, and waterways. |
| Transport field | Status |
| UN number | Not regulated |
| UN proper shipping name | Not regulated |
| Transport hazard class | Not regulated |
| Packing group | Not regulated |
| Environmental hazards | Not regulated as a transport environmental hazard based on available information |
| Special precautions | Protect containers from damage, freezing, and excessive heat. Keep containers upright and securely closed. |
| Bulk transport | Not applicable to packaged product as supplied |
| Regulation | Status |
| OSHA Hazard Communication Standard | The finished mixture is not classified as hazardous under 29 CFR 1910.1200. |
| TSCA | Components are listed on, or exempt from, the U.S. Toxic Substances Control Act inventory based on supplier information. |
| EPCRA / SARA 302 and 313 | No reportable components identified at applicable thresholds based on available supplier information. |
| EPCRA / SARA 311–312 | Refer to the Section 2 finished-mixture classification and applicable facility reporting thresholds. |
| CERCLA | No reportable hazardous substances identified at applicable thresholds based on available supplier information. |
| California Proposition 65 | No listed chemicals are intentionally added at concentrations requiring a warning based on available supplier information. Reassess if the formulation or supplier information changes. |
| Canadian distribution | No Canadian WHMIS or Hazardous Products Regulations classification is asserted by this U.S. SDS. Complete a separate Canadian review before Canadian distribution. |
| Field | Information |
| Prepared by | NxTech Holdings LLC d/b/a Vital Coat |
| Address | 668 Capital Circle NE, Suite 12, Tallahassee, Florida 32301 USA |
| Telephone / email | 1-844-284-2858 | [email protected] |
| Original issue date | July 20, 2025 |
| Revision date | July 22, 2026 |
| Revision | Revision C |
| Revision summary | Storage range standardized at 40–95°F (4–35°C); Section 9 melting/freezing, auto-ignition, and decomposition entries aligned to the approved treatment as not determined. |
Return to Shingleton Guard Product Documents
Shingleton Guard product documents
Shingleton Guard Safety Data Sheet
Approved Revision C
NxTech Holdings LLC d/b/a Vital Coat is the document owner, seller, and warrantor. Shingleton Guard is the Roof Scientist white-label product/program.
SHINGLETON GUARD™
SAFETY DATA SHEET
1. IDENTIFICATION
2. HAZARDS IDENTIFICATION
Precautionary information
- Avoid contact with eyes and prolonged or repeated skin contact.
- Avoid breathing spray mist. Use adequate ventilation and appropriate spray controls.
- Wash hands thoroughly after handling. Do not ingest.
- Keep out of reach of children. Clean spills promptly to prevent slipping.
3. COMPOSITION / INFORMATION ON INGREDIENTS
The finished mixture is not classified as hazardous based on available supplier information and its finished-product formulation.
4. FIRST-AID MEASURES
5. FIRE-FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
- Avoid eye and skin contact and breathing spray mist.
- Wear appropriate personal protective equipment.
- Restrict access and use caution because wet material is slippery.
Containment and cleanup
- Stop the release if it can be done safely. Prevent entry into drains, storm drains, soil, and waterways.
- Contain with sand, vermiculite, or another inert absorbent. Collect material in a suitable closed container.
- Wash the affected area with soap and water after bulk material has been collected. Dispose of waste in accordance with applicable requirements.
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
11. TOXICOLOGICAL INFORMATION
Toxicological studies have not been performed on the finished mixture. The information below is based on available supplier information and the finished-product classification.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Dispose of contents and containers in accordance with applicable federal, state, and local requirements. Do not discharge liquid product into drains, stormwater systems, waterways, or onto the ground. Empty containers should be handled in accordance with local requirements. Waste classification is the responsibility of the generator and may depend on use, contamination, and local rules.
14. TRANSPORT INFORMATION
15. REGULATORY INFORMATION
The declarations below are based on available supplier information for the finished mixture and should be revalidated whenever the formulation or applicable requirements change.
16. OTHER INFORMATION
Disclaimer
This Safety Data Sheet is based on information believed reliable and is provided as safety guidance, not as a product specification or warranty. Users are responsible for determining suitability, following the current product label and Technical Data Sheet, and complying with applicable laws and workplace-safety requirements.
END OF SAFETY DATA SHEET
| Document control | Details |
| Document number | SDS-SG-001 |
| Revision | Revision C — approved August 10, 2026 |
| Revision date | July 22, 2026 |
| Product classification | Not classified as hazardous under OSHA 29 CFR 1910.1200 |
| Field | Information |
| Product identifier | Shingleton Guard™ |
| Product code | NXT-S19M |
| Chemical family | Proprietary water-based acrylic copolymer mixture |
| Recommended use | Professional asphalt-shingle roof preservation coating / sealer |
| Restrictions on use | For professional exterior use. Not intended for interior applications, as a waterproofing membrane, as a leak-repair product, or for structurally unsound roofs. Use only as directed by the current product label and Technical Data Sheet. |
| Supplier | NxTech Holdings LLC d/b/a Vital Coat |
| Address | 668 Capital Circle NE, Suite 12, Tallahassee, Florida 32301 USA |
| Telephone / email | 1-844-284-2858 | [email protected] |
| Emergency telephone | 1-844-284-2858 — available during normal business hours |
| Item | Classification / Statement |
| OSHA classification | Based on available supplier information and the finished-product formulation, this mixture is not classified as hazardous under the OSHA Hazard Communication Standard, 29 CFR 1910.1200. |
| Signal word | None required |
| Hazard pictograms | None required |
| Hazard statements | None required for OSHA-classified hazards |
| Other hazards | Wet product and spills may create slippery surfaces. Spray mist may cause temporary eye or respiratory discomfort. Repeated or prolonged contact may cause mild skin irritation in sensitive individuals. |
| Component information | Disclosure |
| Chemical nature | Proprietary water-based acrylic copolymer mixture |
| Hazardous ingredients | No ingredients are required to be disclosed at applicable OSHA hazard-classification or concentration thresholds. |
| Trade-secret statement | Specific chemical identities and concentrations are withheld as trade secrets where permitted by applicable law. |
| Route | First-aid response |
| Eye contact | Rinse cautiously with clean water for at least 15 minutes, lifting the upper and lower eyelids. Remove contact lenses if present and easy to do. Obtain medical advice if irritation persists. |
| Skin contact | Wash with soap and water. Remove contaminated clothing and wash it before reuse. Obtain medical advice if irritation persists. |
| Inhalation | Move to fresh air if spray mist causes discomfort. Obtain medical attention if breathing difficulty or irritation persists. |
| Ingestion | Rinse mouth. Do not induce vomiting unless directed by medical personnel. Contact a physician or poison-control center if symptoms occur or a significant amount is swallowed. |
| Most important symptoms | Temporary eye, skin, respiratory, or gastrointestinal irritation may occur. |
| Medical treatment | Treat symptomatically. No specific antidote is known. |
| Item | Information |
| Suitable extinguishing media | Use extinguishing media appropriate for the surrounding fire, including water spray, foam, dry chemical, or carbon dioxide. |
| Unsuitable media | Do not use a solid water stream where it may spread burning material. |
| Specific hazards | The product is water-based and is not expected to sustain combustion under normal conditions. Thermal decomposition may produce carbon oxides and other irritating gases. |
| Protective equipment | Firefighters should use protective equipment appropriate to the surrounding fire, including self-contained breathing apparatus when conditions require it. |
| Topic | Requirement |
| Safe handling | Avoid eye and skin contact. Avoid breathing spray mist. Do not ingest. Wash after handling. Keep the container closed when not in use. |
| Storage | Store in a cool, dry, well-ventilated area between 40°F and 95°F (4°C and 35°C). Protect from freezing and excessive heat. Keep containers tightly closed. |
| Incompatibilities | Keep away from strong acids, strong bases, and strong oxidizing agents. |
| Shelf life | Refer to the current product label and Technical Data Sheet for controlled shelf-life information. |
| Control | Guidance |
| Occupational exposure limits | No occupational exposure limits have been established for the finished mixture. |
| Engineering controls | Provide adequate general ventilation. Control spray mist at the source where practical. Avoid application in confined or poorly ventilated spaces without an appropriate respiratory-hazard assessment. |
| Eye / face protection | Wear safety glasses with side shields. Use chemical splash goggles or a face shield when splashing is possible. |
| Skin protection | Wear protective gloves and work clothing appropriate to the task and anticipated exposure. |
| Respiratory protection | Normally not required with adequate ventilation and controlled spraying. If ventilation is inadequate or spray mist cannot be controlled, select respiratory protection through the employer’s respiratory-protection program and applicable OSHA requirements. |
| Hygiene | Wash hands after handling. Do not eat, drink, or smoke while using the product. Remove contaminated clothing and wash before reuse. |
| Property | Value |
| Physical state | Liquid |
| Color / appearance | Milky white; dries clear |
| Odor | Slight/Typical Acrylic |
| Odor threshold | Not determined |
| Melting point / freezing point | Not determined; protect from freezing |
| Boiling point or initial boiling point and range | 212°F/ 100°C |
| Flammability | Not classified as flammable |
| Lower and upper explosion limits | Not applicable / not determined |
| Flash point | None |
| Auto-ignition temperature | Not determined |
| Decomposition temperature | Not determined |
| pH | Neutral to Slightly Acidic |
| Viscosity | <500 cps |
| Solubility | Water-based; Infinite |
| Partition coefficient n-octanol/water | Not determined |
| Vapor pressure | Not determined |
| Density and/or relative density | 1.02 |
| Relative vapor density | Not determined |
| Particle characteristics | Not applicable — liquid mixture |
| Item | Information |
| Reactivity | Not reactive under normal conditions. Hazardous polymerization is not expected. |
| Chemical stability | Stable under recommended storage and handling conditions. |
| Possibility of hazardous reactions | None expected under normal processing. |
| Conditions to avoid | Freezing, excessive heat, and contamination with incompatible materials. |
| Incompatible materials | Strong acids, strong bases, and strong oxidizing agents. |
| Hazardous decomposition products | Thermal decomposition may produce carbon oxides and other irritating gases. |
| Endpoint | Information |
| Likely routes of exposure | Eye contact, skin contact, inhalation of spray mist, and ingestion |
| Acute effects | May cause temporary irritation or discomfort. The mixture is not classified for acute toxicity. |
| Skin corrosion / irritation | Not classified. Prolonged or repeated contact may cause mild irritation in sensitive individuals. |
| Serious eye damage / irritation | Not classified. Direct contact may cause temporary irritation. |
| Respiratory or skin sensitization | Not classified based on available information. |
| Germ-cell mutagenicity | Not classified based on available information. |
| Carcinogenicity | Not classified based on available information. |
| Reproductive toxicity | Not classified based on available information. |
| STOT — single or repeated exposure | Not classified based on available information. |
| Aspiration hazard | Not classified. |
| Numerical measures of toxicity | No finished-mixture acute toxicity estimate is available. |
| Topic | Information |
| Ecotoxicity | No finished-mixture data are available. |
| Persistence and degradability | No finished-mixture data are available. |
| Bioaccumulative potential | No finished-mixture data are available. |
| Mobility in soil | No finished-mixture data are available. |
| Other adverse effects | Avoid uncontrolled release to soil, drains, stormwater systems, and waterways. |
| Transport field | Status |
| UN number | Not regulated |
| UN proper shipping name | Not regulated |
| Transport hazard class | Not regulated |
| Packing group | Not regulated |
| Environmental hazards | Not regulated as a transport environmental hazard based on available information |
| Special precautions | Protect containers from damage, freezing, and excessive heat. Keep containers upright and securely closed. |
| Bulk transport | Not applicable to packaged product as supplied |
| Regulation | Status |
| OSHA Hazard Communication Standard | The finished mixture is not classified as hazardous under 29 CFR 1910.1200. |
| TSCA | Components are listed on, or exempt from, the U.S. Toxic Substances Control Act inventory based on supplier information. |
| EPCRA / SARA 302 and 313 | No reportable components identified at applicable thresholds based on available supplier information. |
| EPCRA / SARA 311–312 | Refer to the Section 2 finished-mixture classification and applicable facility reporting thresholds. |
| CERCLA | No reportable hazardous substances identified at applicable thresholds based on available supplier information. |
| California Proposition 65 | No listed chemicals are intentionally added at concentrations requiring a warning based on available supplier information. Reassess if the formulation or supplier information changes. |
| Canadian distribution | No Canadian WHMIS or Hazardous Products Regulations classification is asserted by this U.S. SDS. Complete a separate Canadian review before Canadian distribution. |
| Field | Information |
| Prepared by | NxTech Holdings LLC d/b/a Vital Coat |
| Address | 668 Capital Circle NE, Suite 12, Tallahassee, Florida 32301 USA |
| Telephone / email | 1-844-284-2858 | [email protected] |
| Original issue date | July 20, 2025 |
| Revision date | July 22, 2026 |
| Revision | Revision C |
| Revision summary | Storage range standardized at 40–95°F (4–35°C); Section 9 melting/freezing, auto-ignition, and decomposition entries aligned to the approved treatment as not determined. |
Return to Shingleton Guard Product Documents
.sg-doc{--sg-navy:#092648;--sg-orange:#F58220;--sg-white:#FFFFFF;--sg-gray:#F4F5F7;max-width:980px;margin:0 auto;padding:clamp(1rem,3vw,2.25rem);color:var(--sg-navy);font-family:Montserrat,Arial,sans-serif;line-height:1.65;background:var(--sg-white);position:relative}.sg-doc:before{content:"";display:block;height:8px;margin:-1rem 0 1.5rem;background:linear-gradient(110deg,var(--sg-navy) 0 78%,var(--sg-orange) 78% 83%,var(--sg-navy) 83% 100%);clip-path:polygon(0 0,97% 0,100% 50%,97% 100%,0 100%,1.5% 50%)}.sg-doc h1{color:var(--sg-navy);font-size:clamp(2rem,5vw,3.25rem);font-weight:800;line-height:1.08;margin:0 0 .65rem;padding-bottom:.65rem;border-bottom:3px solid var(--sg-orange)}.sg-doc h2{color:var(--sg-navy);margin:2rem 0 .7rem;font-size:1.55rem;font-weight:800}.sg-doc h3{color:var(--sg-orange);margin:1.35rem 0 .4rem;font-size:1.18rem;font-weight:800}.sg-doc p{margin:.55rem 0}.sg-doc ul{margin:.5rem 0 1rem 1.25rem}.sg-doc li{margin:.3rem 0}.sg-kicker{color:var(--sg-orange);font-weight:800;letter-spacing:.09em;text-transform:uppercase}.sg-meta{background:linear-gradient(135deg,var(--sg-gray),var(--sg-white));border-left:6px solid var(--sg-orange);border-right:2px solid var(--sg-navy);padding:1rem 1.2rem;margin:1.25rem 0}.sg-note{background:#fff8f1;border:1px solid var(--sg-orange);border-radius:0 12px 0 12px;padding:1rem 1.2rem;margin:1.25rem 0}.sg-grid{display:grid;grid-template-columns:repeat(2,minmax(0,1fr));gap:1rem;margin:1.3rem 0}.sg-card{border:1px solid #d8dee5;border-top:5px solid var(--sg-orange);border-radius:0 14px 0 14px;padding:1.25rem;background:linear-gradient(155deg,var(--sg-white),var(--sg-gray));box-shadow:0 8px 22px rgba(9,38,72,.08)}.sg-card h2{margin-top:0;font-size:1.3rem}.sg-button{display:inline-block;background:var(--sg-navy);color:var(--sg-white)!important;text-decoration:none;padding:.72rem 1.05rem;border:2px solid var(--sg-orange);border-radius:0 9px 0 9px;font-weight:800;transition:background .2s,color .2s}.sg-button:hover,.sg-button:focus{background:var(--sg-orange);color:var(--sg-navy)!important}.sg-doc a{color:#a74d00;font-weight:700}.sg-doc table{width:100%;border-collapse:collapse;margin:1rem 0}.sg-doc th,.sg-doc td{border:1px solid #cbd4dd;padding:.68rem;text-align:left;vertical-align:top}.sg-doc tr:nth-child(even){background:var(--sg-gray)}.sg-doc tr:first-child td{border-top:3px solid var(--sg-orange)}@media(max-width:680px){.sg-grid{grid-template-columns:1fr}.sg-doc{padding:1rem}.sg-doc:before{margin:-.25rem 0 1.15rem}.sg-doc table{font-size:.9rem;display:block;overflow-x:auto}.sg-doc h1{font-size:2rem}}